Furnaces and equipment offered

For laboratories > Muffle

LABORATORY MUFFLE FURNACE TYPE FCF12SH

Type	FCF12SH
Max. temp. [°C]	1300
Chamber dimensions [mm] width x height x depth	240 x 200 x 250
Volume [dm³]	12
Overall dimensions [mm] width x height x depth	585 x 805 x 750
Power [kW]	3,3
Weight [kg]	80
Supply voltage [V~]	230
Heating up time (1000°C) [min]	75

print
a specification
sheet make an inquiry about this product

If you have any questions please contact us:
tel. 32 47 07 495
tel./fax 32 47 07 502
e-mail: czylok@czylok.com.pl

Muffle furnaces are designed to conduct thermal processes in the laboratory with a particular application in the conditions ofthe occurrence of aggressive environment in the chamber in the form of gases, dust, chips, etc. The ceramic muffleseparates the heating elements from the inside of the heating chamber, provides longer service life and maintains a stabletemperature. It is possible to equip the furnace with a temperature programmer type M or temperature regulator type P.

TEMPERATURE PROGRAMMER TYPE M		TEMPERATURE REGULATOR TYPE P

One four-and two single displays allow easy reading of the actual temperature of the object and set parameters. With the ability to program a delayed start time as well as the holding time, ie. to maintain oven temperature for a certain time, it is possible to automatically carry out a series of burnings unattended. This gives you the opportunity to work eg. during the night tariff for electricity or to heat-up the furnace to the required temperature ahead of time, avoiding unnecessary downtime. Has the ability to program the time (ie. speed) to reach the desired temperature. Characterized by a programmable 10 stages in each program of work, where the stage corresponds to the set temperature, the time to come to the temperature and time of annealing temperature setpoint. This enables the formation of burning curve for any given furnace with varying lengths of growth or fall of temperature over time.		Two four character displays allow easy reading of the actual temperature of the object and set parameters. With the ability to program a delayed start time as well as the holding time, ie. to maintain oven temperature for a certain time, it is possible to automatically carry out a series of burnings unattended. This gives you the opportunity to work eg. during the night tariff for electricity or to heat-up the furnace to the required temperature ahead of time avoiding unnecessary downtime.

List of additional equipment:

Additional portable temperature measurement system

Basket for four crucibles and the basket handle. Baffle dimensions 30x30 mm, 25 mm depth; overall dimensions 90x80 mm, height 80 mm.

Catalyst excerpt

Ceramic shelf for the furnace chamber. Parts furnace chamber at half height. Available for FCF 12 and FCF 22.

Chamber calibration. PCA accredited laboratory.

Computer program for visualization's recording and archiving time-temperature parameters of furnace operation.

Computer set with a software

Connection of the protective gas supply. Installed on the door of the furnace, outer diameter 6mm.

Cuvette with a holder. Holder's internal dimensions 150 x 100 x 200 mm (WxHxD); vol 3 l, max temp. 1100° C.

Excerpt with a fan

Furnace stand with shelf

Heat resistant gloves

Heat-resistant steel cuvette. The maximum use temperature up to 1100° C.

Laboratory tongs

Measurement calibration. PCA accredited laboratory.

Pre-heating gas system

Retort inset for muffle furnaces. Available for FCF 12S and FCF 22S. The maximum use temperature up to 1100° C.

Screen Recorder KD8. Touch screen 5.7", archiving data on the card up to 4 GB, 6 measurement inputs, visualization

Sight glass installed in the door of the furnace. Diameter 20 mm.

Sound signaling completion of the program

Stand for six crucibles. 30mm hole diameter, 28mm depth, stand equipped with a handle base. The maximum use temperature up to 1100° C.

Stand with canopy fitted to the outer dimensions of the furnace equipped with an exhaust fan and a lower shelf.

Steel tray adapted to the dimensions of the furnace with a handle. The maximum use temperature up to 1100° C.

Steel tray with holes, stand and tray holder. Adapted to the dimensions of the furnace. The maximum use temperature up to 1100° C.

Temperature sensor calibration. PCA accredited laboratory.

Thermocouple connector (installed in the door of the furnace, acid-proof frame, max diameter 11mm).

Viewfinder provided with input from quartz glass. Diameter 25 mm.

<< back

See other products in the category: Muffle

Type	Max. temp.	Chamber dimensions [mm]			Volume	Overall dimensions [mm]			Power	Weight	Supply voltage	Heating up time (1000°C)
	[°C]	width	height	depth	[dm³]	width	height	depth	[kW]	[kg]	[V~]	[min]

FCF1S	1150	110	85	110	1	295	445	501	0,8	20,5	230	30

FCF2,5S	1150	140	85	210	2,5	370	526	523	1,4	30	230	30

FCF2,5SH	1300	140	85	210	2,5	370	526	523	1,6	30	230	30

FCF5S	1150	180	125	250	5	452	600	668	2,4	45	230	35

FCF5SH	1300	180	125	250	5	452	600	668	2,4	45	230	35

FCF7S	1150	180	125	300	7	452	600	724	2,5	47	230	45

FCF7SH	1300	180	125	300	7	452	600	724	2,8	47	230	45

FCF12S	1150	240	200	250	12	585	805	750	2,8	77	230	75

FCF12SH	1300	240	200	250	12	585	805	750	3,3	80	230	75

FCF22S	1000	290	220	350	22	730	620	750	3,3	90	230	85

FCF 26SH	1300	240	200	550	26	685	645	1070	6	112	400	75

FCF22SH	1300	290	220	350	22	770	680	860	4,5	130	230	40